Package Includes:

• 1x nail brush
• 5x 15ml extension poly gel
• 1x nail sanding buffer
• 1x box nail form
• 1x 35ml cleanser plus
• 1x 7ml base coat
• 1x 7ml top coat
• 1x 9W UV Lamp

Step by Step:

1. Use the nail file to shape your nail surface.
2. Apply the base coat. Cure by UV/LED lamp.
3. Use a suitable shape of the nail.
4. Apply an adequate amount of the temperature poly gel on the nail plate model.
5. Apply the crystal gel averagely on the nail model with a brush.
6. Put the poly to your nail. Cured by UV/LED lamp.
7. Remove the nail plate model after dry, extend a molding.
8. Apply the topcoat. Cure by UV/LED lamp. 9.Complete.

To Remove:

• Soak off the nails into acrylic remover for about 5 minutes, 
• Rip down the whole piece of nail enamel gently on each nail

Notice:

1. The net volume is 15ml. Since the capacity of the bottle is more than 15ml, the temperature poly gel will not fully filled with the bottle!
2. Since the color depends on the temperature, you can see the different color in different temperatures.
3. When you choose a nail mold , the mold should be bigger than your nails, this poly gel needs to be cured by a nail lamp to dry it. the extrusion may cause cracking of the bottle.